SW socket welding flange

SW socket welding flange refers to a flange that is inserted into the flange ring ladder at the end of the pipe and welded on the outside of the pipe. There are two types: with neck and without neck. The flange with neck tube has good rigidity, small welding deformation, and good sealing performance, and can be used in situations with pressure ranging from 1.0 to 10.0 MPa. Type B flanges for containers are also socket welding flanges, used in situations where sealing requirements are high. During design, socket welding flanges can be verified as integral flanges

Flanges can be divided into carbon steel according to their manufacturing materials: (20 #, A3, Q235, Q23 excellent, Q235B, 20G, 16Mn, Q345, Q345R, ASTM A234WPB, ASTM A105, etc.); Stainless steel: (304, 304L, 316, 316L, S30408, S30403, S31608, S31603, SUS304, ASTM A403, TP321, TP317L, 347, 0Cr18Ni9, 00Cr19Ni10, 00Cr17Ni14Mo2, 1Cr18Ni9Ti, 06Cr17Ni12Mo2, 022Cr17Ni12Mo2, etc.); Alloy steel: (16MnR, Cr5Mo, 12Cr1MoV, 10CrMo910, 15CrMo, 12Cr2Mo1, A335P22, St45.8/III, A10bB, etc.); Special alloy steel: (TP310S, 904L, Incoloy800, Incoloy825, Incoloy600, Incoloy625, etc.); Dual phase stainless steel: (F51, S31803, S2205, F53, 2507, S32750, F55, 2607, S32760, etc.)

Common types of flanges: 1. PL plate flat welding flange, 2. SO neck flat welding flange, 3. WN neck flat welding flange, 4. SW socket welding flange, 5. Th threaded flange, 6. BL flange cover, 7. Eight character blind plate, 8. PJ/SE neck welding ring loose flange, 9. PJ/PR flat welding ring loose flange, 10. reducing flange, 11. stainless steel flange, 12. pressure vessel flange, 13. American standard flat welding flange, 14. American standard SO neck flat welding flange, 15. American standard WN neck welding flange. Common sealing surface form codes for flanges: protruding RF, concave FM. Common execution standards for flanges include convex surface M, tenon surface T, groove surface G, full plane FF, and ring connection surface RJ. The current flange standards in China are divided into two systems, namely PN series (European system) and Class series (American system). The pressure markings specified in this standard are divided into PN markings and Class markings. The PN label has 12 pressure levels, namely: PN2.5; PN6; PN10; PN16; PN25; PN40; PN63; PN100; PN160; PN250; PN320; PN400。 The Class label has 6 pressure levels, namely: Class 150; Class 300; Class 600; Class 900; Class1500; Class 2500。 The implementation standards include GB series (standard), JB series (mechanical department), HG series (chemical department), ASME B16.5 (American standard), BS4504 (British standard), DIN (German standard), JIS (Japanese standard)

Standards: GB/T9112-2010, GB/T9119-2010, GB/T9116-2010, GB/T9115-2010

Chemical Department Standards: HG/T20592-2009, HG/T20615-2009, HG5010-52~HG5028-58, HGJ44-91~HGJ65-91, HG20592-97

American Standards: ASME B16.5, ASME B16.47

Mechanical Department Standards: JB81-59~JB86-59, JB/T79-94~JB/T86-94, JB/T74-1994

Pressure Vessel Standards: NB/T4702-2012, NB/T47021-2012

JB/T4701), NB/T47022-2012 (JB/T4702), NB/T47023-2012 (JB/T4703), NB/T47024-2012 (JB/T4704)